Stainless Steel Immersion Wort Chiller (25' x 3/8 in. With Tubing)
An affordable wort chiller made from 25' of 3/8'' Stainless Steel tubing. 8' of vinyl tubing is attached to both the in and the out with a female garden hose fitting on the "water in" side. Uprights are held together by a single hose clamp rather than welding/soldering.Â
Approx. 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle.
Can also be used as a Heat Exchange Recirculating Mash System (H.E.R.M.S)